1 inch 30mm 34mm Cantilever Scope Mount, One-Piece Picatinny Offset Dual Ring 1.5 inch Lightweight Rifle Scope Rings Mounts

TP18 Cantilever Mounts InstructionsThank you for purchasing AlMPACT cantilever mounts. Our One-Piece scope mounts are manufactured to the highest tolerances.The mounts are precision made on 5-axis CNC machines and minimize the number of operations required to complete the machining process. We have been able to cut the number of operations required from eight to two. By doing this, there is no accuracy loss due to re-setting for different operations.Our mounts have undergone 168 hours of salt spray testing and good rust prevention treatment, and do not require additional lubricant application. 1. Mounts with a cantilever design should be placed with the cantilever portion towards the muzzle . Place the mount onto the Picatinny rail, pre-tightening the 2 base screws to 10 in-lb, and finally tightening to 30 in-lb.2. Place the riflescope into your normal shooting position. Check eye relief and ensure the vertical crosshair is aligned with the rifle's vertical axis, scope leveling system use is advised.3. Carefully tighten the 12 screws of the 2 top cap, from center to center, then at opposing corners, to the recommended pre-tightening torque setting of 8 in-lb. 4. Finally evenly tighten the 12 screws of the 2 top caps to 18 in-lb, using care to maintain an even gap between the ring gap. Caution: no more than 30 in-lb of torque should be applied to ring screws.

• 30mm One Piece Scope Mount: Engineered for 30mm scopes, this cantilever mount Precision-engineered 30mm rings with 1.5" Profile. for optimal clearance. It will work great on any 5.56. Mounts to any Picatinny mounting platform.
• Hold Well Zero: Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil. Scope mount have 3 screws on each ringside and paired with dual fastening recoil lugs and 2 strong torx screws.
• Offset Cantilever Mount: A forward extension of 58mm optimizes eye relief and head positioning, reducing neck strain during prolonged use. The ergonomic design of the 1.5-inch scope mount is ideal for tactical and hunting scenarios and ensures quick target acquisition and all-day comfort.
• Aerospace-Grade Aluminum: Crafted from 6061 aviation aluminum, this lightweight picatinny rail scope mount weighs just 6.42 oz, balancing strength and agility. Manufactured using 5-axis CNC technology, it reduces machining operations from 8 to 2 steps, eliminating alignment errors and ensuring flawless consistency.
• Durability: the TP18 survives 168-hour salt spray testing and features rust-resistant coatings—no lubricants are needed. It includes an Allen wrench.