110V 1L Dual Digital Display Automatic Electric Lubrication Pump Oiler NC Pump CNC Engraving Router Machine Oil Pump

ELEOPTION 110V 1L Dual Digital Display Automatic Electric Lubrication Pump Oiler NC Pump CNC Engraving Router Machine Oil Pump1. This is an automatically controlled Oil Pump, working time from 1 to 999 seconds, down time can be adjusted from 1 to 999 minutes 2. Low noise, high efficiency, simple operation 3. Applicable to machine tools, textile machinery, elevators, woodworking machinery gears, rail lubrication, chain lubrication, etc., so as to achieve without manual operation, regular quantitative automatic lubricationParameter: 1. Oil Pump volume: 1L 2. Voltage: 110V 3. Pressure: 1.0Mpa / 10Kg The discharge amount: 50ml / min 5. Use oil viscosity range: 15-68c.st 6. applies resistance systems 7. The Oil Pump has an oil level alarm system 8. Oil Pump time settings: working time from 1 to 999 seconds; downtime from 1 to 999 minutes 9. Interface tubing diameter: 4mmPackage Included: 1 x lubrication Oil Pump The solution for unable to produce oil: First try : Do not let go until the oil is released. Air is in the motor. If the oil still cannot be released second try: open the yellow cover, remove the oil pipe on the motor, press and jog until the oil comes out

• There is a visual oil level gauge and automatic detection device. When the oil quantity is insufficient, the automatic alarm reminds you to refuel (except for 0.5 litre A models).
• Built-in oil pump buzzer alarm to remind. Recommend the use of N15 # -N68 # lubricants (oil) rail oil.
• Can replace the manual pump, pump intermittent pre-TM .There are visual oil level gauge and automatic detection devices, when there is insufficient fuel, automatic alarm to remind refueling.
• Intermittent working time set free, straightforward operation. Set working hours range (1-999 seconds, set the maximum working time 16 minutes). Set break time range (1-999M / min, maximum rest time 16.65 hours)
• The solution for unable to produce oil: First try : Do not let go until the oil is released. Air is in the motor. If the oil still cannot be released second try: open the yellow cover, remove the oil pipe on the motor, press and jog until the oil comes out