14x5.00-6 Tubeless Tire and Wheel Assembly 14/5.00-6 14x5.00-6 6 Inch 3-Lug Steel Rim for ATV Go-Kart Mini Bike Quad Buggy Snow Blower Lawn Mower Garden Tractor Off-Road Four Wheeler – Set of 2

The Right Tire. The Right Rim. Ready to Install.Finding a correctly sized tire and wheel assembly for ATVs, go-karts, snow blowers, and garden tractors can be surprisingly complicated — tire size designations vary, hub bolt patterns differ, and buying a tire without a matching rim means a separate mounting step. This 14x5.00-6 tubeless tire and 6-inch 3-lug steel rim assembly eliminates all of that. The tire arrives pre-mounted on the rim, dimensioned to fit standard 3-stud 6-inch hubs, and ready to bolt directly onto your vehicle.The 2-ply tubeless construction handles the load requirements of light utility and recreational vehicles reliably. At a maximum load rating of 308 lbs (140 kg) at 24 PSI and a recommended operating pressure of 10 PSI, this tire is appropriately rated for ATVs, go-karts, mini bikes, snow equipment, and garden machinery without the overengineering — and cost — of heavier-ply commercial tire constructions. The tubeless design removes the inner tube from the equation: no pinch flats, more consistent pressure retention, and simpler maintenance over the tire's service life.The 3-stud iron rim is built to the standard 6-inch hub specification: 78mm bolt spacing, 54mm center bore, and 345mm overall outer diameter. These dimensions match the hub geometry of the majority of ATVs, go-karts, mini bikes, snow blowers, snow throwers, lawn mowers, and garden tractors running 6-inch 3-lug wheels. Installation is a direct bolt-on process — align the bolt pattern, fit the lug nuts, torque to your vehicle's specification, and the wheel is operational.This tire size is listed under multiple equivalent designations including 14x5.00-6, 14/5.00-6, 14x5.00x6, and 14x5x6 — all refer to the same tire dimensions. If your current tire or vehicle manual references any of these size codes, this assembly is the correct replacement size.Suitable for front or rear fitment depending on your vehicle's hub configuration. A straightforward, no-tools-required replacement for worn, flat, or damaged OEM wheels on snow equipment, lawn and garden machinery, and light off-road recreational vehicles.Spec Summary: 14x5.00-6 Tubeless | 2-Ply | 308 LBS / 140kg Max Load | 24 PSI Max | 10 PSI Operating | 3-Stud Iron Rim | 78mm Bolt Spacing | 54mm Center Bore | 345mm OD | 135mm Section Width | Pre-Assembled

• FITS STANDARD 6-INCH 3-STUD HUBS — WIDE VEHICLE COMPATIBILITY Tire and wheel assembly designed for standard 6-inch 3-lug hub configurations found on ATVs, go-karts, mini bikes, quad buggies, snow blowers, snow throwers, lawn mowers, garden tractors, and light off-road utility vehicles. 3-stud iron rim with 78mm (3.07") bolt spacing and 54mm (2.1") center bore fits the majority of 6-inch 3-lug axle hubs used across these vehicle categories. Verify your hub bolt spacing and center bore diameter before ordering to confirm fitment.
• 2-PLY TUBELESS CONSTRUCTION — 308 LBS MAX LOAD CAPACITY 2-ply rated tubeless tire supports a maximum load of 140kg (308 lbs) at 170 kPa (24 PSI) cold inflation pressure, with a recommended operating pressure of 10 PSI for general use. Tubeless design eliminates inner tube pinch flat risk, maintains air pressure more consistently over time, and simplifies inflation and maintenance compared to tubed tire alternatives. No inner tube required — mount, inflate, and go.
• PRECISE DIMENSIONS FOR DIRECT FITMENT Tire size: 14x5.00-6 (also referenced as 14/5.00-6, 14x5.00x6, and 14x5x6 — all equivalent sizing designations). Overall wheel outer diameter: 345mm (13.6"). Tire section width: 135mm (5.3"). Rim material: iron with durable painted finish. Pre-assembled tire and rim unit arrives ready for direct hub installation — no tire mounting equipment or bead seating required before fitment.
• OFF-ROAD CAPABLE TREAD — RELIABLE TRACTION ON MIXED SURFACES Tread pattern engineered to provide stable grip on packed dirt, gravel, grass, and light mixed terrain commonly encountered in ATV, go-kart, and utility vehicle applications. Suitable for both front and rear wheel positions depending on your vehicle's hub configuration. Balanced tread design supports predictable handling and even wear across a range of surface conditions and load types.
• PRE-ASSEMBLED UNIT — BOLT ON AND RIDE Tire arrives fully mounted on the 3-stud iron rim and ready for immediate installation. Align the 3-bolt pattern with your hub studs, torque down the lug nuts using your existing hardware, and installation is complete. No specialist tools, no tire shop visit, no bead mounting required. Compatible with snow blowers, snow throwers, mini bikes, lawn tractors, garden equipment, ATVs, go-karts, and any vehicle running standard 6-inch 3-lug wheel hubs.