2 Pack - Single Output 3 ohm Ignition Coil Fits Honda CB72 CB77 CB350 CL350 SL350 CB360 CL360 CB450 CL450, Yamaha AT1 AT2 CS5 CT1 DT125 LS2 R5 RD125 RD200 RD250 RD350 TX500 TX650 TX750 XS1 XS500 XS650

Set of 2 single output 3 ohm high performance Magna coils. This is a great upgrade from stock coils.Features &Benefits:No exposed lamination's to rust and degrade performance.High voltage and primary terminals machined from brass.Ultrasonically welded and sealed against moisture.Compact size fits easily under stock covers.High impact thermoplastic housing.Over 30,000 volts per output.Accepts 7 to 8.5mm wires.Specifications:Primary Resistance = 3 ohmsSecondary Resistance = 12,600 ohmsMounting Holes = 90mm or 102mm (measured center to center)Mounting Posts = 13mm Width x 12mm HeightIncludes Hardware, wiring and boots shown in the photo.NOTE: When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system, this will cause the coils to overheat and burn out. Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used.Installation Note: This coil has polarity, there is a + symbol and a - symbol on the coil.For Use With Honda: (these do not bolt on to the stock bracket - custom brackets might be necessary)CB72 Hawk 250 - 1961-1966CL72 Scrambler 250 - 1962-1965CB77 Super Hawk 305 - 1961-1968CL77 Scrambler 305 - 1965-1968CB350K/G - 1968-1973CL350K - 1968-1973SL350K - 1969-1973CB360K - 1974CB360G - 1974CB360T - 1975-1976CJ360T - 1976-1977CL360K - 1974-1975CB450K - 1965-1974CL450K - 1968-1974CB500T - 1975-1976

• Set of 2 single output 3 ohm high performance Magna coils. This is a great upgrade from the stock coils.
• Note: For points type ignitions and electronic ignitions with stock charging systems, we suggest using the 5 ohm version.
• No exposed lamination's to rust and degrade performance.
• High voltage and primary terminals machined from brass. Ultrasonically welded and sealed against moisture.
• Primary Resistance = 3 ohms , Secondary Resistance = 12,600 ohms
• Mounting Holes = 90mm or 102mm (measured center to center) , Mounting Posts = 13mm Width x 12mm Height
• Includes Hardware, wiring and boots shown in the photo.
• Fits Honda: CB72 Hawk 250 - 1961-1966 | CL72 Scrambler 250 - 1962-1965 | CB77 Super Hawk 305 - 1961-1968 | CL77 Scrambler 305 - 1965-1968 | CB350K/G Super Sport - 1968-1973 | CL350K Scrambler - 1968-1973 | SL350K Motosport - 1969-1973 | CB360K - 1974 | CB360G - 1974 | CB360T - 1975-1976 | CJ360T - 1976-1977 | CL360K Scrambler - 1974-1975 | CB450K Super Sport - 1965-1974 | CL450K Scrambler - 1968-1974 | CB500T Twin DOHC - 1975-1976
• Fits Yamaha: AT1 - 1969-1971 | AT1M - 1970 | AT2 - 1972 | AT3 - 1973 | CS5 - 1972 | CT1 - 1970 | DS7 - 1972 | DT125 - 1974-1976 | LS2 - 1972 | R5 - 1970-1972 | RD125 - 1975-1976 | RD200 - 1974-1976 | RD250 - 1973-1975 | RD350 - 1973-1975 | TX500 - 1973-1974 | TX650 - 1973-1974 | TX750 - 1973-1974 | XS1 - 1970-1971 | XS2 - 1972 | XS500 - 1975 | XS650 - 1975-1979 | XS650S Special - 1978-1980