3" Front 4" Rear Drop Lowering Kit For 1980-1996 Ford F150 F100-3'' Front Drop Coil Spring and 3-4'' Rear Drop Shackles and Hangers

Coils are blue or black depending on stock on handFront Coil Springs are on a FULCRUM It means a 1.5” longerOr Shorter Coil will Raise or Lower 3” (not 1.5”) *A 2 to 1 RatioSprings on a Straight Axle are a 1 to 1 Ratio1.If you did not buy the truck new, there is always the possibility that The truck has already been lowered or lifted. There is only one way To be absolutely sure, and that is to remove your coil on one side and Measure the Free Length and give us the Free Length when you orderNOTE:::When you DROP or LIFT, you need to change the shocks because they will be too short, or too long!!2.These springs are designed to replace your original Coil Springs Before Installing, measure the Free Lengthof your original coils To confirm original Length. Coils are not always flat at the bottom. They Are trimmed at the factory and at times we trim them3.To make minor adjustments to your specs. If they are not flat, they will still compress properly when installed. NOTE: When a coil is trimmed, the spring rate remains the same.Original Length should be: _________ + or minus ½”WHY MEASURE? Because some vehicles have suspension packages From the factory that vary of the published LengthIf your Original coils are not within the limit, stop and email us SEE PUBLISHED FACTORY LENGTHS BELOW1965-1979 F100/150 15.90”1980-1996 FORD F150 16.19”Fitment:1980-1996 Ford F100 F-100 F150 F-150 2 Wheel DrivesSVT Lightning is already factory loweredInclude:3'' drop coil spring2'' drop rear leaf spring forward hanger1-2'' drop rear leaf spring rearward shackle

• COMPATIBLITY: Our leaf spring hangers and shackles lowering kit fits for Ford F150 F100 1980-1996 2WD
• FUNCTION: The shackles and hangers kits can drop Pickup truck length by 4 inches, with left, right and rear positions replacement. The lowering kit has perfect fitment
• SUPERIOR QUALITY: The early ford shackles and hangers have been strictly tested to make sure sufficient torsional strength and proper road simulated performance. Each shackle hanger bracket has been powder coated and rust-resistant,mounting parts included