CSI Ceram-X 3" Scratch & Headlight Restoration Kit | Pro Results with Any Drill | Includes Ceram-X Polish (8oz), Wool Cutting Pad, Foam Finishing Pad & Backing Plate

★★★★★ 4.7 59 Bewertungen

€19.40
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€19.40
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 23.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 213173627 Erscheinungsdatum 2026/04/12 Listenpreis €19.40 Modellnummer 213173627
Kategorie

The CSI Ceram-X 3" Paint Correction Kit delivers professional-level correction with engineered simplicity. At the center of the system is Ceram-X Polish, CSI’s flagship single-product polish engineered to remove defects while preserving paint integrity. Built on a tight waterborne nano-emulsion, Ceram-X delivers controlled, predictable correction without masking, fillers, or excessive material removal. This kit pairs Ceram-X with purpose-built 3" pads to give you true cutting power and a refined, swirl-free finish—all without switching products or relying on aggressive compounds. The 3" format is ideal for tight areas, spot correction, bumpers, pillars, and precise work where control matters most. Every component in this kit exists for one reason: verified correction with less material removed. No shortcuts. No gimmicks. Just engineered results. Paint correction should refine and enhance paint—not shorten its lifespan. Directions: To remove and/or diminish any car paint scratches attach backing plate to drill motor and use the wool pad to first to perform the initial "cut", followed by the foam finishing pad to refine the paint surface to perfection.

  • Complete 3" Correction System Includes 8 oz Ceram-X Polish, 3" wool cutting pad, 3" foam finishing pad, and 3" backing plate—everything required for precise spot correction and finishing.
  • ENGINEERED NANO-EMULSION CONTROL SYSTEM A true active nano-emulsion that governs abrasive behavior and lubrication—not a passive carrier. Thixotropic by design: stable at rest, fluid only under motion, delivering controlled correction exactly when mechanical stress is applied.
  • TRUE WATERBORNE THERMAL STABILITY A solvent-free, waterborne architecture engineered to absorb and dissipate friction heat, preventing temperature spikes, flashing, and loss of control—while remaining workable across wide temperature ranges, including direct sunlight.
  • HONEST CORRECTION — NO FILLERS, NO DIE-BACK Zero heavy solvents, waxes, or fillers that swell paint or hide defects. What you see after polishing is true correction—no shrink-back, no delayed scratch reveal, no visual deception in the sun.
  • NON-DIMINISHING ABRASIVE PRECISION Uniform, non-diminishing abrasives maintain constant cutting geometry from start to finish, with precise particle spacing that prevents dead spots and stray scratches. No random breakdown, no timing window, no guessing—just predictable, repeatable defect removal.
  • PAD-CONTROLLED CUTTING & REFINEMENT A single engineered polish transitions from heavy defect removal to high-gloss refinement by changing pads—not products. Cutting, polishing, and finishing occur within one stable system without stepping down chemistry.
  • LINEAR CORRECTION WITH MAXIMUM CLEARCOAT PRESERVATION Every pass refines the surface—no “compound damage” to undo. Shear-cut abrasive action removes defects laterally rather than gouging vertically, preserving measurable clearcoat compared to multi-step compound systems.
  • CLEAN, NON-DUSTING WORKING CHARACTERISTICS No gumming, no dusting, no hard residue, and no chemical fight. Wipes off clean and rinses with basic tap water, keeping pads, panels, and workflow efficient and controlled.
Grit Type Aluminum Oxide
Brand Name CSI
Unit Count 1.0 Count
Item Weight 16 ounces
Manufacturer CSI
Material Type Aluminum Oxide, Foam, Plastic Hook and Loop, Wool
Item Dimensions 0.08 x 0.06 x 0.03 inches
Grit Material Type Aluminum Oxide
Compatible Material Metal, Glass, Plastic, Paint, Rubber, Wood, Composite
Included Components Ceram-X polish, 3" wool cutting pad, 3" foam finishing pad, 3" backing plate
Global Trade Identification Number 00852986006886

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.7 von 5
★★★★★
59 Bewertungen | 24 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
86% (51)
4 Sterne
2% (1)
3 Sterne
1% (1)
2 Sterne
1% (1)
1 Stern
10% (6)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.