DPTOOL Engine Camshaft Alignment Timing Tool Kit Compatible with Buick Envision Cadillac XT4 2.0LT LSY Chevrolet Silverado 2.7L L3B 2.0L LSY Engine Replace EN-52462 EN-52436 EN-52461-200 EN-52476
€100.00
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von www.firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€100.00
Preis bei Onlinekauf
Kostenloser Versand
30 Tage kostenlose Rückgabe
Verkauft und versendet von www.firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details
Produktdetails
| Artikelnummer | 218232310 | Erscheinungsdatum | 2026/05/03 | Listenpreis | €100.00 | Modellnummer | 218232310 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- Application: This timing tool kit fit 2.7L L3B 2.0L LSY engine. for CT5 2.0L LSY 2020-2024, for CT6 2.0L LSY 2016-2019, for XT4 2.0L LSY 2019-2024, for XT5 2.0L LSY 2020-2024, for XT6 2.0L LSY 2021-2024, for Envision 2.0L LSY 2020-2024, for Blazer 2.0L LSY 2020-2024, for Acadia 2.0L LSY 2020-2023,for CT4 2.7L L3B 2020-2024, for CT4-V 2.7L L3B 2022-2024, for Colorado 2.7L L3B 2023-2024, for Canyon 2.7L L3B 2023-2024, for Silverado 1500 2.7L L3B 2019-2024, for Sierra 1500 2.7L L3B 2019-2024
- Function: When camshaft timing or actuator service is required, the actuators must be held in order to remove and install the oil control valves (OCV), which act as fasteners to attach the camshaft actuators to the camshafts. EN-52461 ensures the actuators are held in the timed position for OCV service, and are used to remove all slack from the timing chain prior to timing chain, actuator, or camshaft service
- OEM Equivalent Part Number: EN-52436, EN-52461, EN-52461-100, EN-52461-200, EN-52462, EN-52442, EN-52476, GM-52461, GM-52462-A, GM-52476. This timing tool set includes EN-52436 timing chain tensioner retention tool, EN-52461 camshaft torque reaction tool, EN-52462-a camshaft alignment tool, EN-52476 flywheel locking tool, EN-52442 engine balance shaft holding tool, EN-52461-100 and EN-52461-200 torque adapters cam phaser adapter
- How To Use: EN-52476 installs in place of the starter and ensures that the flywheel is in the timed position for timing chain service. It also locks the flywheel ring gear teeth to allow flywheel bolt, balancer bolt, and camshaft actuator installation and torqueing. Once the body of EN‑52476 is installed in place of the starter, the flywheel is turned until the spring-loaded lock pin engages into the timing hole in the flywheel
- Tips for Use: The timing pin must be retracted before torqueing any fasteners. Torqueing fasteners with the timing pin engaged in the flywheel timing hole will damage the timing pin on EN-52476
| Brand | DPTOOL |
|---|---|
| Model | Engine Timing Tool Kit |
| Item Weight | 14.33 pounds |
| Manufacturer | DPTOOL |
| OEM Part Number | EN-52436, EN-52461, EN-52461-100, EN-52461-200, EN-52462, EN-52442, EN-52476, GM-52461, GM-52462-A, GM-52476 |
| Item model number | K1013C |
| Package Dimensions | 13.18 x 10.23 x 3.54 inches |
| Manufacturer Part Number | HK1013C |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage