Einsy Rambo1.2e TMC2130 SPI Driving Mode, 3D Printer Motherboard for I3 MK3 3S, Compatible with MEGA Atmega2560

★★★★★ 4.5 21 Bewertungen

€33.76
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€33.76
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 20.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 211759975 Erscheinungsdatum 2026/04/04 Listenpreis €33.76 Modellnummer 211759975
Kategorie

Feature:1. TMC2130 SPI Drive Mode: 3D printer motherboard contains TMC2130 SPI drive mode and is compatible with Reprap for i3 MK3/3S 3D printers.2. Wide Compatibility: Printer motherboard is compatible with MEGA Atmega2560 and Atmega32u2 processors, and is compatible with all RAMPS firmware.3. Easy Installation: 3D printer motherboard module is easy to install and use, and it can be used after installation without complicated procedures.4. 4 Drivers: 3D printer motherboard has 4 TTMC2130 micro step motor drivers (2 connectors on Z are compatible with for Mendel and other dual Z printer designs)5. Note: The recommended power supply is 12V?24V DC, 16A+, and the pre configured firmware is pre loaded on the board.Specification:Item Type: 3D Printer MotherboardMaterial:PCBApplicable :Reprap for i3 MK3/3SHow to Use:Installandyoucanuseit.Package List:1 x 3D Printer Motherboard 1 x Data Cable1 x Terminal4 x Cooling Fins

  • Wide Compatibility: Printer motherboard is compatible with MEGA Atmega2560 and Atmega32u2 processors, and is compatible with all RAMPS firmware.
  • TMC2130 SPI Drive Mode: 3D printer motherboard contains TMC2130 SPI drive mode and is compatible with Reprap for i3 MK3/3S 3D printers.
  • 4 Drivers: 3D printer motherboard has 4 TTMC2130 micro step motor drivers (2 connectors on Z are compatible with for Mendel and other dual Z printer designs)
  • Easy Installation: 3D printer motherboard module is easy to install and use, and it can be used after installation without complicated procedures.
  • Note: The recommended power supply is 12V‑24V DC, 16A+, and the pre configured firmware is pre loaded on the board.
Brand FOSA
Model Name fosap9dhvu3asf
Unit Count 1.0 Count
Manufacturer fosa
Model Number fosap9dhvu3asf
Item Type Name 3D Printer Controllers
Number of Ports 15
Total Usb Ports 1
Compatible Devices Printer
Compatible Processors MEGA Atmega2560, Atmega32u2
Memory Slots Available 2
Graphics Card Interface Integrated
Main Power Connector Type 24V DC
System Bus Standard Supported SATA 3

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.5 von 5
★★★★★
21 Bewertungen | 9 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
83% (17)
4 Sterne
4% (1)
3 Sterne
2% (0)
2 Sterne
1% (0)
1 Stern
10% (2)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.