FLIPSKY FSESC 75350 84V High Current 350A ESC Base On Vesc with Aluminum Case Water Cooling Enclosure for E-Foil Fighting Robot Surfboard AGV Robot

Warm tips:Phase filering is not available for Flipsky ESC75100 and 75200!Please turn off the phase filter function and choose "false" in vesc_tool when use firmware version on or above 5.3 (VESC_TOOL 3.01). Without turning off the phase filter will result in esc damage. Please do not restore the default parameters when using the wizard interface.Spec:Voltage:14-84V( safe for 3-20S)Continuous Current : 50V/350A,75V/250AMax Current :800ASupported sensors: ABI, HALL, AS5047,AS5048AEPRM:150000Size:200*94.6*50mm((Including the height of water pipes and electrolytic capacitors)Feature:Regenerative brakingThe CPU adopts the 32F405 with the main frequency of 168MHz and the Cortex-M4 architecture with DSP function;Sensored or sensorless operation + hybrid modeConfigurable RPM-, current-, voltage- and power limitsInput source: PPM, ADC, NRF,UART,PASCommunication ports: USB, CAN, UART,SPI,IICThrottle curve and ramping for all input sourcesSeamless 4-quadrant operationMotor revolution, ampere hour, watt hour countingReal-time data analysis and readout through the communication port.Adjustable protection against:Low input voltageHigh input voltageHigh motor currentHigh input currentHigh regenerative braking current (separate limits for the motor and the input)High RPM (separate limits for each direction)Digital VCC and analog VCC are produced by different voltage regulators respectively to make the system AD conversion more accurateMotor wire: 8AWGPower cable: 8AWGWaterproof level(with water cooling enclosure):IP67

• ▶Use aluminum alloy case for better heat dissipation effect,which makes ESC more durable.
• ▶Voltage:14-84V( safe for 3-20S) Continuous Current : 50V/350A,75V/250A Max Current :800A.Supported sensors: ABI, HALL, AS5047,AS5048A.
• ▶Warm tips: It is recommended to keep firmware 5.2 from factory ship, the new firmware upgrade may damage the ESC.
• ▶Size:200*94.6*50mm((Including the height of water pipes and electrolytic capacitors)
• ▶Input source: PPM, ADC, NRF,UART,PAS Communication ports: USB, CAN, UART,SPI,IIC