Hot Racing ERVT46M01 46t Mod 1 Steel Spur Gear E Revo 2 XO-1

★★★★★ 4.9 20 Bewertungen

€11.95
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von www.firecrackerkaraoke.com.au
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€11.95
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 07.11.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von www.firecrackerkaraoke.com.au
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 219468566 Erscheinungsdatum 2026/05/03 Listenpreis €11.95 Modellnummer 219468566
Kategorie

Hot Racing 46 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the TRA E Revo2, 6S and 8S, Mxx 4S, XO-1.XRT and Sand CarFEATURES: - CNC machined hardened steel construction- Black oxide finished- Laser etched tooth count markingYOU WILL RECEIVE: - One (1) 46 tooth, 1.0 modulus steel spur gearREQUIREMENTS: - Do NOT use the pin system for setting the gear mesh. Instead, manually set the gear mesh without the pins. Refer to the TRA manual for instructions (ref. pg.22 - Adjusting Gear Mesh)- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. SPECIFICATIONS: - Overall diameter: 48.7mm- Gear face width: 8mmCOMMENTS: - Replace TRA plastic 6447 or 6447X 54T spur gear

  • Exceptional durability: Constructed with CNC machined hardened steel, this spur gear provides added strength and protection for your TRA E Revo2, 6S and 8S, Mxx 4S, XO-1, and XRT vehicles.
  • Increased lifespan: Designed with a black oxide finish, this gear is resistant to wear and corrosion, ensuring long-lasting performance and protecting your investment.
  • Reliable gear mesh setting: Unlike other gears, this one doesn't rely on a pin system for gear mesh adjustment. Instead, it allows for manual gear mesh setting, providing greater control and precision.
  • Easy installation: Simply loosen the four 4x16mm button-head cap screws on the bottom, insert a strip of paper to set the gear mesh, tighten the screws, and remove the strip. Enjoy smooth operation without any binding.
  • Optimal dimensions: With an overall diameter of 48.7mm and a gear face width of 8mm, this gear is designed to perfectly fit your TRA E Revo2 and provide improved performance during your hobby activities.
UPC 083745293197
Model ERVT46M01
Brand Name Hot Racing
Part Number ERVT46M01
Manufacturer Hot Racing
Material Type Plastic

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.9 von 5
★★★★★
20 Bewertungen | 8 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
89% (18)
4 Sterne
1% (0)
3 Sterne
0% (0)
2 Sterne
0% (0)
1 Stern
10% (2)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.