KWODE Replacement Brass Hydraulic Control Spindle Assembly Cartridge Faucet Valve for Bathroom Kitchen Wall Mount Commercial Faucet (1 Pair Hot & Cold)

KWODE brass faucet spool is a replaceable spool suitable for the general faucet in the market. If you buy a KWODE series faucet, this spool is100% adaptable, if you plan to install this spool on other faucets, it is also feasible, provided that you make sure that the sizes of the two are matched.Refer to spool size chart below heading.There is no fixed cartridge suitable for any faucet. You'd better take apart the original cartridge to compare the size, then replace the original cartridge if the same size.Please check the dimensions carefully before ordering to ensure compatibility with your model.Make sure it is thread size G 3/4 "BSP.Compare the height of the cartridge.Make sure the direction of the opening, it is clockwise or anti-clockwise.How to remove the old cartridge and install the replacement?Step 1: Lever the lid of the faucet handle with a knife.Step 2: loosen the screw with a screwdriver.Step 3: remove the screw.Step 4: remove the faucet handle.Step 5: screw off the old cartridge with a wrench.Step 6: remove the old faucet valve and install the replacement.

• Universal specifications: The dimensions of valve are suitable for most faucets on the market. For detailed product dimensions, please refer to the size picture on the picture page. The product contains a handle, so you don't need to worry about finding a suitable handle.（This stem Spindle is only for commercial faucet or pre rinse faucet parts, do not us e for other faucet, any issue, please contact us from your order)）
• High-quality materials: The faucet valve core is made of solid brass material, which is wear-resistant and does not rust. You can use it for more than 3 years.
• Good Sealing: The valves of the faucet is sealed with a rubber gasket, which has a good sealing effect, does not leak, and saves water resources
• Different installation and use methods of hot and cold water valve: The hot and cold water valve core is distinguished by the red and blue marks on the handle. Red is rotated clockwise to open the faucet, counterclockwise to close, and blue is opposite to red. Please assemble according to your faucet characteristics during installation.
• Easy to Install：1 screwdriver and 1 wrench can complete the installation, Can be used for single or double hot and cold water taps.Great for bathroom, kitchen