KYO-EI Kics Monolith Inner Cap Resin M14 Red 20P CMF4R

This product is a resin cap that is attached to the handle in the shape of the Monolith Nut pattern. Recommended for users who are concerned about corrosion of vehicle hub bolts. Available in 2 colors: red and black. By combining the color of the nut, you can choose the one that suits your preferences and create a uniform look. (*When the inner cap is attached, the effective screw of the nut will be 0.9 inches (23 mm). Please note that long hub bolts. ) The color of the product may differ from the actual product in the photo. We appreciate your understanding. When this cap is installed, the effective screw on the nut is 0.9 inches (23 mm). Please be aware of vehicles with long hub bolts. The fitting of the adapter may be slightly shallow. Please be careful to hang the wrench diagonally. Note: This cap is made of resin and can withstand temperatures up to 212°F (100°C). It may melt or fall off in harsh environments such as lacing. Please remove it when using it with lace. The cap is designed to be installed by inserting the claws into the grooves of the screw. Due to the structure, it is fixed with resin claws so it is not completely fixed. The tire may come off due to rotation, vibration, or heat deformation. We appreciate your understanding. Also, if the cap is not fully inserted into the nut, it will be easy to fall off. Please insert the cap completely in the case. If you are not completely removed, please use strong adhesive to secure it completely. In that case, please do not stick the adhesive to the vehicle hub bolt. In addition, we do not provide any warranty on the job defects, breakage, failure, or accidents caused by working. Please be aware of Please do not use an impact wrench. The cap may come off due to vibration of the impact wrench. Repeated installation and removal will cause the claws to wear off, making them easy to remove. Please be careful. Please ensure that the cap is inserted deep into the nut. Insert the dedicated adapter in the nut and insert it all the way. If the cap does not fit deep into the nut enough, it will be easy to remove. If the cap is oblique in appearance, please use a special adapter as shown in the diagram above, and insert the cap into the depth.

• Brand: MONOLITH T1/06 [M12] MONOLITH T1/07 [M14]