MG Chemicals 8332 Super Strength Fast Set Epoxy, 5000 PSI, 25 ml Dual Dispenser, Non Conductive, Amber

8332 is a quick-set, two-part epoxy adhesive with a five-minute working life. Conveniently packaged in a 25mL dual syringe with a twist off cap for easy mixing. Bonded parts only need to be held together for eight to ten minutes before they sufficient set for handling. It offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, woods, and most metals and plastics. Protects against thermal and mechanical shocks. Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons. Hardness (Shore D): 82D Tensile strength: 5000 psi. Dielectric Constant @2. 3 mm: 252 V/mingles transition temperature (Tag): 64 °C [147 °F]RoHS compliant. This is a general purpose adhesive suitable for household, industrial and manufacturing applications. 1. Twist and remove the cap from dispensing syringe. Do not discard cap. 2. Dispense a small amount to ensure even flow of both parts. 3. (Optional) Attach a static mixer. (cat # 8MT-25)a. Dispense and discard 3 to 5 mL of the product to ensure a homogeneous mixture. B. After use, dispose of static mixer. 4. Without a static mixer, dispense material on a mixing surface or container, and thoroughly mix parts and B together. 5. To stop the flow, pull back on the plunger. 6. Clean nozzle to prevent contamination and material buildup. 7. Replace the cap on the syringe. Cure Instructions: Room temperature cure: Let cure at room temperature for 5 h. Heat cure: Put in oven at 65 °C [149 °F] for 15 min.

• 1:1 mix ratio
• Tensile strength of 5000 psi
• Set time: 8 to 10 minutes Cure time: 5 hours at room temperature or 15 minutes at 65 °C
• Low shrinkage
• Provides strong electrical insulation