Natural Gas Grill Regulator with 2 Brass Fittings Gas Pipe in/Out 1/2'' X 1/2"-14NPT, Max Inlet Pressure:1/2" PSI, Outlet Pressure LPG 10" NG 4" W.C, NPT Natural Gas Low Pressure Regulator

Natural Gas Grill Regulator With 2 Brass Fittings Gas Pipe In / Out 1/2'' X 1/2"-14NPT, Max Inlet Pressure:1/2" PSI, Outlet Pressure LPG 10" NG 4" W.C, NPT Natural Gas Low Pressure Regulator Gas Type- LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4"-10" Water Column. This regulator is for 1/2" gas pipes. 1/2" IN and 1/2" OUT Female Pipe Thread. The 1/2" gas pipe means interior diameter 1/2" . Inlet pressure (CSA rated and Maximum operating): 1/2 PSI Outlet pressure range: 4” - 10” Water Column Ambient operating temperature range: 32°F - 140°F (0°C - 60°C). Applications- Natural LP Gas grills, heater, oven, Gas Welding Equipment Attention: NOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GAS. CAUTION: Never connect regulator directly to the propane supply source. Maxitrol regulators require an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator. Install the regulator properly with gas flowing as indicated by the arrow on the casting. NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment.

• Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column.
• Fitting- in 1/2" x out 1/2" NPT Pipe threads. With Two 3/8" Male Flare Thread Fittings. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator.
• Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels.
• Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator
• Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator.