TapRite Separate Pressure Adjusting 2 Product CO2 Regulator

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. Tap two kegs at the same time and control the pressure to each of them individually. This two product two pressure CO2 regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable shut down blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 Gauges measure pressure to each keg. 0-2000 Gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Specs: dimensions: 9\inchW x 7 1/2\inchH x 5 1/2\inchD.

• Tap two kegs at the same time and control the pressure to each
• 0-60 gauges measure pressure to each keg
• 0-3000 gauge measures CO2 in tank
• Has air shut off switch for each CO2 line
• Nonadjustable "shut down" blows off at 55-65 PSI