USB-FP0 USB-AFC8513 Programming Cable for FP0/FP2/FP-M

CablesDescriptions:This USB-FP0 cable is a suitable replacement of USB programming cable for FP0, FP2, FPe, FP-M series and also Touch Screen like GT01, GT30,GT11,etc.. This cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software to communicate through simulated traditional port and devices. Embedded with this cable is the necessary data conversion equipments to communicate between end to and PC USB end. FeaturesSupport FPSOFT V1.1 and above.Support Windows 7/2000/Windows XP (WinNT4/95/98/Me/DOS NOT SUPPORTED).baud rate: 300 bps ~ 1Mbps automatically adaptive. USB bus-powered, with current consumption of 50 mAEach PC Support multiple cablesSupport UART data format: Data bit: 8, stop bit: 1, 2, Parity: odd / even / no parityCompatible with USB V1.1 and V2.0Reliable performance & reasonable UsageUSB device drivers should be installed before using programming cable which can be downloadedAfter completing Driver installation, the corresponding COM port for the programming cable will be displayed in the Device Manager of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.Package info 1 x USB-FP0 Programming Cable (NO box and CD)==========Model Number : USB-AFC8513DIY Supplies : ELECTRICAL

• Cables
• USB-FP0 USB-AFC8513 Programming Cable For FP0/FP2/FP-M